THE DIFFERENCE IS
THE FORMULATION...
Degadur MMA systems are acrylic reactive resins based on technologically
advanced methyl methacrylate polymer chemistry.
These systems begin with extremely
thin (low viscosity) primers that penetrate the pores of the
concrete creating a substantial increase in the upper zone of
the concrete's tensile, flexural and compressive strengths.
THE DIFFERENCE IS
THE BOND...
Subsequent layers of Degadur MMA resins then chemically fuse
together (intercoat adhesion). The entire system forms an unsurpassed
bond to the substrate and cures as one continuous mass without
cold joints, pores, cracks or voids.
|
What Makes
Dedadur MMA different?
|
THE DIFFERENCE IS THE
ONE HOUR CURE TIME...
Delayed and interrupted schedules cost money and time. Other
flooring systems can take days or even longer to fully cure.
The tendency is to use the surface too soon jeopardizing the
physical properties of the system.
Degadur MMA systems fully cure and are ready for complete use
in one hour - expensive downtime and schedule delays are eliminated.
MMA Intercoat Adhesion
Creates a "Welded" Bond
|
THE DIFFERENCE IS
THE TESTING...
Before every installation, bond test are performed at strategic locations throughout
the job site. These test are then analyzed to insure a strong
and reliable bond of the system to the substrate.
With other flooring systems, the lengthy cure time
prohibits bond testing. This frequently results in expensive
repairs due to bond failure and delamination
Bond Tests Are Performed
Before Every Installation
- In Less Than One Hour.
THE DIFFERENCE IS
THE DURABILITY...
Degadur MMA systems retain their protective physical properties
providing a long, durable service life. These 100% solids, methyl
methacrylate systems are UV, impact and abrasion resistant, non-porous,
impervious and do not chalk, crack, delaminate or become brittle.
These systems are unsurpassed in durability, toughness and resistance
to abuse.
|